|
| Article number | Description | Description | Unit | |
|
|
35110016
|
Clay Cutter
De Beeldhouwwinkel | wood | length 55 cm
|
A solid steel wire with a length of 55 cm (21.65 inch) firmly attached to two wooden handles. This is very convenient for cutting pieces of clay, but also to detach the workpiece from the surface.
|
piece
|
|
|
|
35110020
|
Potter’s Wheel
De Beeldhouwwinkel | plywood | diameter 20 mm
|
This solid potter’s wheel is constructed of marble discs: 2 discs of plywood with balls in between to ensure that the upper disc rotates easy and light. There are four rubber pads under the lower disc to set it securely on the table. Available in two sizes.
|
piece
|
|
|
|
35110085
|
Clay Slats
De Beeldhouwwinkel | beech wood | length 30 cm / width 1 cm / dikte 2 cm
|
You can easily roll out pieces of clay of 1 cm (flat) or 2 cm (on the side) with the combination of the slats and roller. You place an amount of clay between the slats and roll the clay roller repeatedly until it touches the clay slats. The slats and roller are made of sanded beech wood.
|
pair
|
|
|
|
35110095
|
Clay Roller
De Beeldhouwwinkel | beech wood | length 30 cm / diameter 2 cm
|
You can easily roll out pieces of clay of 1 cm (flat) or 2 cm (on the side) with the combination of the slats and roller. You place an amount of clay between the slats and roll the clay roller repeatedly until it touches the clay slats. The slats and roller are made of sanded beech wood.
|
piece
|
|
|
|
35110510
|
Modelling Spatulas
De Beeldhouwwinkel | palm wood | length 10 cm
|
These modelling spatulas are made of sanded palm wood. This wood has the important quality that clay will not easily stick to it. The spatulas come in a set of 15 pieces with different modelling heads at both ends. With this very complete kit you have 30 different heads that allow you to make all possible designs and details in the workpieces. Available in 3 different lengths.
|
set
|
|